UV-Vis Spectrophotometer and Its Importance in Pharmaceuticals Development

Table of Contents

• Introduction and Outcome
• Principle of UV-Visible Spectroscopy
• Beer Lambert Law
• UV spectrum presentation
• UV visible spectrophotometer applications
• Case study: Assay of Paracetamol tablet in formulation
• Advantages of the UV-visible spectrophotometer method
• Disadvantages of the UV-visible spectrophotometer method
• UV spectroscopic terms
  • Chromophore
  • Redshift
  • Blueshift
• Operation procedure
• Conclusion
• Frequently Asked Questions (FAQ)

Introduction and Outcome

The UV-visible spectrophotometer is one of the traditional Analytical techniques, which is widely used in the pharmaceutical industries for both quantitative(such as assay and content test) and qualitative analysis (such as identification test and to find out wavelength maxima of pharmaceuticals). In this article, I will share skill-based knowledge on applications and principles of UV-visible Spectrophotometer with case studies. After reading this article all your doubts will be cleared and your knowledge will increase to the next level.

Principle of UV-visible spectroscopy

UV-visible spectroscopy is based on the principle that molecules absorb light energy at specific wavelength. When a sample is exposed to UV or Visible light, certain molecules of the sample absorb photon of the light, resulting in decrease in the intensity of the transmitted light. The absorption spectrum of a compound is unique to its chemical structure, allowing for identification and analysis.

The following are the UV-Visible range:

• UV-Visible range: 200 nm to 800 nm
• UV range: 200 nm to 400 nm
• Visible range: 400 nm to 800 nm

Beer-Lambert Law

Transmittance (T) is calculated by the following formulae:

T=10^-ε.c.l

Where: T is the transmittance, ε is the molar absorption coefficient and l is the pathlength

The following is the relationship between transmittance (T) and absorption (A):

A(Absorbance)= -Log T or A =ε.c.l

or Absorbance(A) = (molar absorption coefficient) x (concentration) x (pathlength)

Beer-Lambert law states that the absorbance of a solution is proportional to its concentration. molar absorption coefficient and optical path length.

This equation is very helpful and widely used in the industries by Analytical Scientists. This instrument is used to measure the intensity of the light before and after passes through the sample. This instrument provides reading in terms of transmittance (T) and absorbance (A). Transmittance is the ratio of the intensity to the transmittance light to the intensity of the incident light, express as percentage absorbance. Absorbance is the logarithm of the reciprocal of transmittance and is directly proportional to the absorbing species in the sample.

UV Spectrum Presentation

UV spectrophotometer provides the data in the form of an absorption spectrum. The absorption spectrum is normally presented in the form of graph, where the y-axis represents the absorbance, and x-axis represents the wavelengths. Peaks in the spectrum is known as the absorption peaks, indicate the wavelength of light that is absorbed by the sample. The following is the typical representation of the UV spectrum:

Image source: phramaknowledgeforum

Applications of UV-visible spectrophotometer

The following are the different applications of UV-visible spectrophotometer:

1. Quantitative analysis
2. Qualitative analysis
3. HPLC method development
4. Drug formulations studies

1.Quantitative analysis

UV-visible spectrophotometer is used for quantitative analysis such as assay testing, content testing and purity testing of pharmaceuticals

2. Qualitative analysis

The UV-visible spectrophotometer is used for qualitative analysis such as identification test (by comparing wavelength maxima of standard solution) and purity tests such as transmittance test and absorbance test

3. Chromatographic method development

The UV-visible spectrophotometer is used to find out the wavelength maxima of pharmaceuticals during the HPLC method development. It is very helpful in deciding the HPLC operating wavelength.

4. Drug formulations studies

The UV-visible spectrophotometer is used to find out content of uniformity test, dissolution test and assay test during Drug formulations studies

Case study: Assay of Paracetamol tablet in formulation

Paracetamol is one of the well-known medicines, which is analgesic and antipyretic. One of the methods of performing the assay of paracetamol is the UV-visible spectrophotometer. In this method, a sample solution and standard solution of paracetamol is prepared and the UV absorbance of each standard and sample is taken at 243 nm. The Assay is calculated using the UV absorption of standard solution and sample solution and their respective weights.

Advantages of the UV-visible spectrophotometer method

The following are the advantages of the UV-visible spectrophotometer method:

1. Fast analysis
2. Low cost analysis
3. No need of special skill is required for the UV-visible spectrophotometer method

Disadvantages of the UV-visible spectrophotometer method

It is not a specific method and can not be used for impure compounds

UV Spectroscopic terms

The following spectroscopic terms are widely used during the method development:

Chromophore

Chromophores is a groups of atoms responsible for UV-Visible absorption of the molecules such as C=C, C=O, N=N and aromatic rings.

Redshift

Redshift is the change in absorption to a longer wavelength

Blueshift

Blueshift is the change in absorption to a shorter wavelength

Operation procedure of UV Spectrophotometer

• Set the measurement parameter required for the analysis, such as wavelength scan range and photometric recording range
• Set the wavelength scan speed
• Perform baseline correction
• Place the cuvette containing blank reagent into both sample and reference cells of the sample compartment.
• Select baseline correction from the screen
• After baseline correction is finished, replace the blank reagent with the sample solution for the sample cell
• Start to perform the spectrum measurement
• The spectrum measured is being displayed on the measurement screen

Conclusion

The UV-visible spectrophotometer technique plays a pivotal role in the pharmaceutical industry for both qualitative and quantitative analysis.I hope this article, has clarified all your doubts and you can now use effectively the pharmaceuticals development. Write you opinion or suggestions in the comment section.

FAQs

Which type of samples are analyzed by UV spectroscopy?

The compounds having UV absorption can be analysed by UV spectrophotometer such as acetone, toluene, naphthalene, benzoic acid, phenol, paracetamol etc.

What is chromophores?

Chromophores is a groups of atoms responsible for UV-Visible absorption of the molecules such as C=C, C=O, N=N and aromatic rings.

What is Redshift?

Redshift is the change in absorption to a longer wavelength

What is the blue shift?

Blueshift is the change in absorption to a shorter wavelength

What is the effect of solvents on UV Maxima?

The solvent used for the sample diluent should not have UV absorption. For example, if any compound has a maxim at 220 nm then acetone can not be used as a sample diluent. Solvent like water, methanol and ethanol can be used.

What are the different applications of UV spectroscopy?

UV spectroscopy plays an important role in pharmaceutical development due to its simplicity, fast results and cost-effectiveness. It is used for Quantitative analysis, Qualitative analysis and HPLC method development

What are the limitations of UV spectroscopy?

UV spectroscopy has several limitations such as it is not a specific method, it can not be used for impure compounds and it can not be used for compounds having no UV response.

What is the difference between IR spectroscopy and UV spectroscopy?

FTIR spectroscopy uses a longer, lower-energy wavelength range, typically 4,000 to 400 cm-1 (2,500 to 25,000 nm. UV-Visible spectrophotometers are used between 190 to 900 (UV to visible)

What is UV spectroscopy?

UV-visible spectroscopy is based on the principle that molecules absorb light energy at specific wavelength. When a sample is exposed to UV or Visible light, certain molecules of the sample absorb photon of the light, resulting in decrease in the intensity of the transmitted light. The absorption spectrum of a compound is unique to its chemical structure, allowing for identification and analysis

What is the basic principle of UV visible spectroscopy?

The UV-visible spectrophotometer works by passing a light beam through a sample to measure the light intensity of a sample. The sample must have UV absorption. The compounds containing functional groups such as C=C, C=O, N=N and aromatic rings are analysed by uv-spectrophotometer.

References

• UV-Visible spectroscopy
• UV-Visible Spectroscopy

Abbreviations

• UV: Ultraviolet
• nm: nanometer
• T: Transmittance